- Modell Nr.: HTS-210F
- Ausgabetyp : Single
- Garantie : 2 Jahre
- Ausgangsleistung : 101 - 200W
- Eingangsspannung : 110-220V
- Connection Mode : Series Switching Power Supply
- Startmodus : Self-excited Switching Power Supply
- Spannungsregelung : Frequency Modulation Type
- Stromversorgungssystem : Terminal Power Distribution Equipment
- Bescheinigung : CE , UL , RoHS , ISO , CCC
- Trademark: HSD
- Packing: Export Standard Carton Box or ODM
- Standard: GS. CE, EMC, UL/CUL, ROHS
- Origin: Changzhou, Jiangsu
- HS Code: 8504401990
- Production Capacity: 2, 000, 000 PCS/ Year
Geschaltene Modusleistung supply/12V 40A SMPS
Merkmale:
Hohe Leistungsfähigkeit, hohe Zuverlässigkeit, niedrige Kosten
WS-Inputumfang ausgewählt durch Schalter
Schutze: Kurzschluss-/Overeingabe
LED-Schauzeichen für Leistung ein
Abkühlen durch Konvektion der freien Luft
Örtlich festgelegte Schaltungsfrequenz an 23kHz
1-Jahr-Garantie
Abmessung: 129*98*38mm (L*W*H)
Bedingung:
1) INPUT
Spannungs-Umfang: 85-132VAC/170-264VAC, 47-63Hz; Ausgewählt durch Schalter 240-370VDC
WS-Strom: 0.8A/115VAC 0.45A/230VAC
Zustrom-Strom: Kaltstart 18A/115V 36A/230V
Durchsickern-Strom: <0.75mA/240VAC
2) PROTECTION
Über Eingabe: 105%-150%; Das aktuelles Begrenzen zurück falten, wieder.herstellt automatisch, nachdem Störungszustand gelöscht ist.
3) ENVIRONMENT
ArbeitsTemp. U. Feuchtigkeit: -10º C~+60º C; 20%~90% RECHTS.
SpeicherTemp. U. Feuchtigkeit: -20º C~+85º C; 10%~95% RECHTS.
Erschütterung: 10~500Hz, 2G 10min. /1-Schleife, Zeitraum für 60min, jedes entlang X, O, z-Äxte.
4) SICHERHEITSNORMEN
Widerstands-Spannung; I/P-O/P: 1.5KVAC; I/P-FG: 1.5KVAC; O/P-FG: 0.5KVAC
Lokalisierungs-Widerstand: I/P-O/P, I/P-FG, O/P-FG: 100MΩ /500VDC
Sicherheitsnormen: Auslegung sprechen UL1012 an
Emc-Standards: Auslegung sprechen FCC-Teil 15 J Conduction Class A an
5) Keine Ausgabe Tol schreiben. R&N Gültigkeit.
HT-30A 5V, ± 0.5-3A; 2% 50mV 70%
HT-30A 12V, 0.1-1A -6, +2% 100mV 70%
HT-30A -5V, 0.1-0.5A -10, +2% 50mV 70%
HT-30B 5V, ± 0.5-3A; 2% 50mV 72%
HT-30B 12V, 0.1-1A -6, +2% 100mV 72%
HT-30B -12V, ± 0.1-0.5A; 6% 100mV 72%
| PRODUCT NAME | LED driver | |
| OUTPUT | DC voltage | 12V |
| Constant Current Region | 6-12V | |
| Rated Current | 20A | |
| Rated Power | 480W | |
| Ripple&Noise(Max) | 150mVp-p | |
| Voltage ADJ. Range | 11.2-12.8V | |
| Current ADJ. Range | Can be adjusted by internal potential meter or through output cable | |
| 8-16A | ||
| Voltage Tolerance | ±2.5% | |
| Line Regulation | ±0.5% | |
| Load Regulation | ±2.0% | |
| Setup,Rise time | 2500ms,80ms at full load 230VAC /115VAC | |
| Hold up Time(Typ) | 15ms at full load 230VAC/115VAC | |
| INPUT | Voltage Range | 90-305VAC |
| Frequency Range | 47-63Hz | |
| Power Factor | PF>0.95/230VAC PF>0.98/115VAC at full load and rated output voltage PF>0.9 at 65-100% load | |
| Efficiency | 90% | |
| AC Current | 4A/115VAC 2A/230VAC | |
| Inrush Current | cold start 75A/230VAC | |
| Leakage Current | <0.75mA/240VAC | |
| PROTECTION | Over Current | 95-108% |
| protection type:constant current limiting ,recovers automatically after fault condition is removed | ||
| Short Circuit | hiccup mode ,recovers automatically after fault condition is removed | |
| Over Voltage | 13.5-16V | |
| protection type:shut down and latch off o/p voltage,re-power on to recover | ||
| Over Temperature | 105C±5(TSW1) | |
| protection type:shut down o/p voltage ,recovers automatically after temperature goes down | ||
| ENVIRONMENT | Working Temp. | -30- 60 C at full load ;+70 C at 60% load (refer to derating curve) |
| Working Humidity | 20-95% RH non-condensing | |
| Storage Temp.,Humidity | -40- 80C,10-95%RH | |
| Temp. Coefficient | ±0.03%(0-50C) | |
| Vibration | 100-500Hz,5G 12mir/1 cycle,period for 72min,each along X,Y,Z axes | |
| SAFETY&EMC | Safety Standards | UL1012,TUV EN61347-2-13 independent(except for HLG-240HC type ), UL 60950-1,UL8750, TUV EN 60950-1,IP65 or IP67 approved |
| Withsand Voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC | |
| Isolattion Resistance | I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25/70%RH | |
| EMI Conduction& Radiation | compliance to EN55015, EN55022(CISPR22)classB | |
| Harmonic Current | compliance to EN61000-3-2 ClassC(50% load); EN61000-3-3 | |
| EMS Immunity | compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204,EN61547,EN55024, heavy industry level (surge 4KV),criteria A | |
| OTHERS | MTBF | 207.9Khrs min. MIL-HDBK-217F(25 ) |
| Dimension | 244.2*68*38.8mm | |
| Packing | 1.3kg;12pcs/16.6kg/0.74CUFT | |